The Editing Information Tabs 

Each tab is opened up in the subsequent pages where the information/entries and options available are described in detail.

These will allow you to control the numerous options open to you to facilitate the design of the different types of composite beams available within the program. 

1. 📄 Floor Information Beam and floor dimensions and loadings
2. 📄 Beam Section Setup Data Composite deck information
3. 📄 Beam Section Dynamic Data Steel beam section and stud & reinforcement details
4. 📄 Additional Loads Additional point and partially distributed loads
5. 📄 Web Openings Circular and rectangular web openings
6. 📄 Design Assumptions Design assumptions for shear connection & web openings
7. 📄 Design Defaults Default values for loadings, deflections & natural frequency
8. 📄 Open Library Library of metal deck profiles and shear connectors

Click on the relevant link for further information on each tab and their options/entries