📄 How to Import CAD Drawings and Layers into MasterFrame

How to Import CAD Drawings and Layers into MasterFrame

MasterFrame allows you to import a CAD drawing as a snappable underlay. You can select the layers to display, control which layers can be snapped to, define the drawing units and position the underlay on the required structural plane. The imported CAD geometry can then be used to help create members, loads and gridlines.

How to Import a CAD Drawing into MasterFrame

Follow these steps to import a CAD drawing and use it as a snappable underlay in MasterFrame.

Before Importing the CAD File

Prepare the CAD drawing before importing it:

  • Remove layers and objects that are not required.
  • Retain useful structural information such as gridlines, column centres and wall centre lines.
  • Move the required drawing geometry close to the CAD origin at 0,0.
  • Confirm the drawing units before importing it.

Reducing unnecessary CAD content can improve performance and make the structural geometry easier to identify.

Step 1: Open the CAD Layer Tool

Open an existing MasterFrame model or create a new model.

Go to Viewing > CAD Layer.

Step 2: Select the CAD Drawing

Browse to the location of the CAD drawing and select the required file.

Add the accepted CAD file formats here, such as DWG or DXF, after confirming which formats and versions MasterFrame currently supports.

Step 3: Choose the CAD Layers

Select the layers that should be visible in MasterFrame.

Turn off layers that are not required, such as:

  • Doors
  • Windows
  • Fixtures
  • Furniture
  • Architectural annotations

Where appropriate, enable snapping only for useful layers such as structural gridlines, wall centre lines and column centres.

Step 4: Position the CAD Underlay

Set an anchor point on the CAD drawing by holding Ctrl and double-clicking the required location.

Specify where this anchor point should be positioned in the MasterFrame model.

Step 5: Set the Units and Principal Plane

Select the units used to create the original CAD drawing.

Assign the CAD layer to the required principal plane, such as the XY plane. The CAD underlay is displayed when the MasterFrame view is aligned with its assigned plane.

Step 6: Use the CAD Drawing for Modelling

Once imported, the CAD drawing becomes a snappable underlay. You can snap to available locations such as:

  • Lines
  • Endpoints and midpoints
  • Third points
  • Tracking points and tracking lines

The underlay can help you create structural members, gridlines and loads. For example, line loads and patch loads can be positioned by tracing relevant walls or loaded areas shown in the CAD drawing.

Importing Multiple CAD Layers

Multiple CAD layers can be configured within a MasterFrame model. These may represent different floor levels, elevations or building sections.

Give each imported layer a clear name so that its location and purpose can be identified easily.


FAQs

Can I snap to an imported CAD drawing in MasterFrame?

Yes. An imported CAD drawing can be used as a snappable underlay for creating structural members, gridlines and loads.

Why is my CAD drawing not visible in MasterFrame?

Check that the model view is aligned with the principal plane assigned to the CAD layer. Also confirm that the required CAD layers are switched on and that the drawing has been positioned correctly.

Why is the imported CAD drawing the wrong size?

This commonly indicates that the units selected during import do not match the units used to create the original CAD drawing.

Can I control which CAD layers are snappable?

Yes. You can select the layers that should be displayed and identify the layers you want to snap to.

Can I import CAD drawings for different floor levels?

Yes. MasterFrame can contain multiple CAD layers representing different levels, elevations or sections.

Does importing a CAD drawing create structural members automatically?

No. The CAD drawing acts as an underlay. Structural members, gridlines and loads must still be created within the MasterFrame model.