🎥 📺Designing Wall Panels on a Domestic Property with MasterSeries' Masonry Yield Line Analysis & Design
🎥

Designing Wall Panels on a Domestic Property with MasterSeries' Masonry Yield Line Analysis & Design

This video demonstrates the use of the MasterSeries Masonry Design Module for designing cavity wall panels in a domestic semi-detached property. The presentation focuses on using Yield Line Analysis as a more efficient and accurate method compared to traditional design standards.

Video Summary

  • Introduction to Yield Line Analysis (0:00 - 4:33): The presenter explains the theoretical background of Yield Line Analysis, noting its acceptance under both British Standards and Eurocodes as a plastic analysis method for masonry panels.

    • The introduction covers a very brief introduction to the Yield Line Theory, as an analysis method for the design of efficient masonry wall panels, covering how the traditional method of flexural strength design to British Standards and Eurocode 6 actually derives from the Yield Line theory. We then proceed to go through the setup and designs of 11 different wall panels, taking into consideration various factors such as Loading:
  • Front Wall Panels (5:00 - 9:55): A walk-through of four different front wall panels (1-4) with various fixity conditions and loadings (roof trusses, floor joists, and openings).
  • Side Wall and Comparison (10:00 - 12:00): Analysis of panel 5, demonstrating how Yield Line results correlate with traditional methods, followed by panels 7 and 8.
  • Panel 9: Complex Loading and Reinforcement (12:03 - 19:00): A detailed look at a panel with two openings and a concentrated point load from a steel beam. The presenter demonstrates how to use wind posts and stiffened piers to reinforce the wall, clarifying that these do not act as vertical supports but locally enhance flexural capacity.
  • Rear Wall Panels (19:06 - 23:55): Design of rear wall panels 10 and 11, focusing on resisting in-plane shear forces, racking, and moments from adjacent walls.

Also

  • Vertical UDLs (from floors / roofs and wall panels)
  • Vertical Point Loads (from steel beams)
  • Horizontal In-Plane Loads (racking)
  • Horizontal Out-of-Plane Wind Loads (wind)
  • Dealing with multiple Openings
  • Introducing Wall Reinforcement (wall piers and wind posts)
  • Various Free / Continuous / Pinned Fixity Conditions including DPM

Timecodes ⏰ 

  • 00:00 Overall Introduction and Agenda
  • 01:20 Background of Yield Line Analysis within the Masonry Design Module 
  • 04:33 Introduction to Example: Semi-Detached Property 
  • 05:00 Front Wall Panels 1 - 4 
  • 10:00 Wall Panel 5 - Comparison Between Yield Line Analysis and Traditional Methods
  • 10:55 Wall Panel 7 & 8 
  • 12:03 Wall Panel 9 - Panel with 2 openings and a Point Load from a Beam and behaviour of Yield Line Analysis using Wind Posts vs Stiffened Piers 
  • 19:06 Rear Wall Panels 10 & 11 Including Resisting In-Plane Shear Forces and Moments from Adjacent Walls 
  • 23:55 Outro

📥 Download our FREE 14-day MasterSeries trial using the following link 📥 https://www.masterseries.com/free-trial ⏰